CreditLine Settlement Configuration
| This article is part of the
Payment Processing Software Library
|Connect to it...|
|Set it up...|
|Learn to use it...|
|More Info ...|
→ Not finding all the answers? Try Knowledge Base!
→ It is highly recommended that you upgrade to version 3.03.09 or later, as the setup is greatly simplified
Start the CreditLine Manager
- Select Default and click Edit.
→ Note: do not configure American Express to settle to anything except Default unless you have setup a separate Reverse PIP Amex IP account.
- Enter CreditLine Settlement Parameters Dialog
- Configure the Settlement by selecting the correct Net Type ;
- Click Merchant Setup to enter Merchant Setup Dialog and configure Merchant Info
Follow CreditLine Processor Setup Guidelines for individual processor setup.
Default Dial-Up Numbers
For Dial-up: the default dial-up numbers are programmed into CreditLine. If the phone number field is empty, it will be auto-filled after you click OK in Merchant Setup in CreditLine Settlement Configuration dialog. In the latest versions, you can also click Default next to the Phone Numbers fields to auto-fill them, otherwise, delete the phone numbers before entering Merchant Setup to use the auto-fill feature.
Apply To All Auths Feature
If you use Apply To Auths in CreditLine Settlement Configuration, you do not need to setup the CreditLine Authorization Configuration.
→ If Apply To Auths is checked, version 3.03.09 and up propagates the Merchant Setup in CreditLine Settlement Parameters Dialog to the Authorization Configuration in CreditLine Authorization Parameters Dialog for all accepted cards of the same class.
For older versions see CreditLine Apply To All Auths Legacy